N300 Wireless Broadband Router

BR-6428nS +9dBi

  • Complies with wireless 802.11b/g/n standards with high-speed data rate up to 300Mbps
  • 2 detachable 9dBi high gain antennas to enhance the wireless range and coverage
  • Support Wireless Internet Service Provide (WISP) conneciton mode to share Wi-Fi service for multiple users
  • Multiple 5-in-1 AP/ AP client/ bridge/ WDS/ repeater modes
  • Built-in hardware WPS (Wi-Fi Protected Setup) button for easy one-click setup

To provide home and office users who need wider wireless coverage, the Edimax BR-6428nS +9dBi  N300 Wireless Router employs 2 high gain detachable 9dBi antennas to enhance the wireless range and coverage. BR-6428nS +9dBi is a high performance yet cost-effective wireless N device provides an exceptional and advanced wireless performance.  


300Mbps Wireless 802.11n Standard

The BR-6428nS +9dBi is a high-speed Wi-Fi solution which supports IEEE 802.11b/g/n standards, and the detachable 9dBi antennas provide significantly improved coverage. When connected to other 802.11n devices, the BR-6428nS +9dBi can achieve transmission rates of up to 300Mbps, making it  ideal for streaming HD video and online gaming. Impressive performance and a competitive price make the BR-6428nS +9dBi a cost-effective solution for any home or small business environment.



Green Technology

Designed with the latest green technology, the BR-6428nS +9dBi dynamically adjusts the power supply according to the amount of wireless transference, using up to 66% less power than usual while still ensuring the highest standard of wireless performance.

BR-6428nS+9dBi green technology for power-saving up to 66%


Wireless Internet Service Provider (WISP) Connection Mode

With WISP support, the BR-6428nS +9dBi is able to share an Internet connection from a wireless ISP access point and convert it into a wired or wireless network for multiple users in your home or office.



Wi-Fi Protected Setup (WPS) Button

The BR-6428nS +9dBi has a one-click Wi-Fi Protected Setup (WPS) button to help you set up and activate a secure wireless network in a snap.




  • Supports AP, AP client, bridge, WDS and repeater modes
  • Port Triggering for special applications
  • DDNS and SIP
  • Virtual server and DMZ hosting
  • MAC/IP filter and URL blocking
  • Static routing
  • UPnP architecture
  • VPN pass-through (IPSec/PPTP)
  • Schedule control
Hardware Interface
  • 1 x RJ-45 WAN port
  • 4 x RJ-45 Fast Ethernet LAN port
  • LED Indicators: power, wireless, WAN, LNK/ACT for LAN
  • 2 x 9dBi detachable antennas
  • WPS/Reset button
  • Wireless on/off switch
Management & Installation
  • Intuitive user interface
  • System status and security log (web interface)
  • Firmware upgradeable
  • Supports WISP connection mode
  • Supports RJ-45 cable/xDSL modems
  • WAN protocol: PPPoE, static IP, dynamic IP, PPTP and L2TP
Output Power
  • 11n: 16±1dBm,
  • 11g: 16±1dBm,
  • 11b: 18±1dBm
Receive Sensitivity
  • 11n (40MHz): -68dBm,
  • 11n (20MHz): -71dBm,
  • 11g: -74dBm,
  • 11b: -87dBm
  • NAT/NAPT IP sharing
  • 64/128-bit WEP encryption and WPA-PSK, WPA2-PSK security
  • DHCP server/client
  • QoS for critical operations
  • SPI anti-DoS firewall
  • 2MB NOR Flash
  • 16MB RAM
Humidity & Temperature
  • Humidity: 10-90% (non-condensing)
  • Temperature: 0-45°C
Power Adapter
  • DC 5V, 1A
  • 135 (W) mm x 110 (D) mm x 28 (H)
  • Antenna: 385mm
  • FCC, CE



*Maximum performance, actual data rates, and coverage will vary depending on network conditions and environmental factors.
*Actual viewing resolution and frame rate of network cameras depend on connection speed.
*Product specifications and design are subject to change without notice.